The Quintum Tenor DX MultiPath Switch offers enterprises an easy, cost-effective way to capitalize on the power of Voice over IP (VoIP). The Tenor integrates a gateway, a gatekeeper, intelligent call routing, and supports H.323 or SIP, and QoS all in one solution.

Enterprises can benefit from a variety of valuable applications such as PBX extension, remote office connectivity, long distance consolidation and call centers. Product scales from a fractional T1/E1, with 8 simultaneous VoIP channels up to a full 8 span MultiPath switch supporting 120 simultaneous VoIP calls.

Patented SelectNet? Technology assures high-quality voice
The Tenor employs its patented SelectNet? Technology to monitor calls for jitter, packet loss, and latency, and can transparently switch mid-call to the voice network whenever conditions demand.

More intelligence means greater flexibility
With its MultiPath Call Routing, the Tenor can intelligently route calls between the PBX, the PSTN, and the IP network to achieve the best combination of cost and quality. The Tenor can also route calls over IP to reduce costs, and then transparently "hop off" to the PSTN, to reach off-net locations. No other VoIP solution can match this flexibility.

More intelligence means easier installation
With its MultiPath architecture, the Tenor is the only VoIP solution that can be installed without upgrades to the existing voice or data networks. Tenor connects to the data network through a 10/100 Ethernet interface, and to the enterprise and public voice network through a T1, E1, or PRI interface.

More intelligence means greater reliability
The Tenor is designed to pass calls through to the existing voice network in the event of system malfunction ? even a total power failure.

More intelligence means less network congestion
With its PacketSaver?* Technology, the Tenor reduces bandwidth consumption up to 57%, by combining voice packets from several calls into a single packet to minimize bandwidth requirements.

More intelligence means better management
The Tenor comes with a set of easy-to-use configuration and management tools, including Tenor Configuration Manager (GUI) and Wizard, and the Tenor Monitor that offers realtime monitoring of alarms, call status and CDRs. Tenors can easily be remotely managed behind NAT firewalls utilizing the Tenor Remote Management Session Server.*

CALL MANAGEMENT FEATURES Automatic call type detection: Voice/Modem/Fax Answer and Disconnect Supervision Trunk group support Public and private dial plan support User programmable dial plan support Forced routing Pass-through support for calls to Toll Free, local and special service numbers (emergency services, etc.) Automatic appending and stripping of digits to dialed numbers Call Detail Records Least Cost Routing with external Quintum VoIP Call Routing Server* TECHNICAL SPECIFICATIONS Voice algorithms: G.723.1 and G.729ab, G.711 Auto codec negotiation Fax support: Industry standard T.38 and Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps Modem over IP Choice of 2, 4, 6, or 8 T1/E1/PRI Spans Standard RJ-45 Connectors Coding: A-law, ?-law Enhanced (Carrier Grade) Echo Cancellation: ITU Rec. G 168, up to 128 msec tailsize PRI Signaling Protocols: National ISDN-2, Euro ISDN NET5, Japan INS-NET1500, KDD, 4ESS, 5ESS, DMS10 0 T1 CAS (E&M, Loop Start, Feature Group-D, DTMF, MF) E1 CAS (R2 MF) DASS2 Tandem/TDM switching Maximum Call Rate: 7,200 calls/hour VoIP to circuit, and circuit to circuit (Tandem/TDM) switching IP Network Specifications LAN Interface: Fast Ethernet port (10/100 Base-T) Standard RJ-45 Interface (IEEE 802.3) for 10 Base-T or 100 Base-T connections QoS Support: IP TOS, DiffServ VoIP Network Specifications H.323 v.3 Gateway and Integrated Gatekeeper SIP User Agent (RFC 3261 compliant endpoint) SIP Back-to-back User Agent (B2BUA)** SIP RFC2833 In-Band DTMF Signaling SIP Refer Method support IVR/RADIUS server support for AAA with integrated multilingual IVR Adaptive Voice Activity Detection (VAD) with Comfort Noise Generation (CNG) Adaptive Jitter Buffer Packet Loss Compensation NATAccess� Security: IP Filtering Up to 120 simultaneous VoIP calls Configuration/Management Quintum Tenor Configuration Manager (GUI) for configuration of remote individual Tenors Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring and CDR monitoring SNMPv2 Agent Command Line Interface Dimensions (1U High Chassis) W 17 3/8" x H 1 3/4" x D 10 3/4" W 44.5cm x H 4.5cm x D 27.6cm Maximum weight: 8.25 lbs (3.75kg) AC Power: 100-240 Volts AC, 50/60 Hz, 50 watts Operating temperature: 40� - 104� F (5� - 40� C) Operating humidity: 20% - 80% non-condensing Telco: FCC Part 68, TS-016, TBR4, TS-038, CS03 EMC: FCC Part 15, EN55022, EN55024, EN61000-2-3, EN61000-3-3 Safety: UL60950, EN60950, AS/NZS60950