The Quintum AXT1600 16 Port FXO VoIP Gateway has 16 VoIP Channels.
The Quintum AX Series gives businesses with analog voice infrastructures an easy, cost-effective way to capitalize on the power of Voice over IP (VoIP). The Tenor integrates a gateway, a gatekeeper, and intelligent call routing, and supports QoS all in one solution.
With its MultiPath architecture, the Tenor connects to the data network through a 10/100 Ethernet interface, the voice network through either a PBX or phone, and the public switched telephone network.
CALL MANAGEMENT FEATURES
Automatic call type detection: Voice/Modem/Fax
Answer and Disconnect Supervision
Trunk group support
Public and private dial plan support
User programmable dial plan support
Forced IP routing and IP port mapping
Pass-through support for calls to Toll-Free, local and special service numbers (i.e., emergency services, etc.)
Automatic appending and stripping of digits to dialed numbers
Call Detail Records
Least cost routing with external Quintum VoIP Call Routing Server*
Type I Caller ID Name support (Telcordia, ETSI, NTT and DTMF)
TECHNICAL SPECIFICATIONS
Voice algorithms: G.723.1a, G.729ab, G.711
Auto codec negotiation
Fax support: Industry standard T.38 and Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps
Modem over IP
Choice of 8, 16, or 24 FXS and/or FXO configurations or a 48 FXO only configuration
Standard 50 pin RJ-21 Telco connectors
Coding: A-law, ?-law
Enhanced (Carrier Grade) Echo Cancellation: ITU Rec. G168, up to 128 msec tailsize
Loop Start, Reverse Battery, Battery Disconnect
Tandem/TDM switching
Maximum Call Rate: 1,800 calls/hour
IP Network Specifications
LAN Interface: 1 Fast Ethernet port (10/100 Base-T)
Standard RJ-45 Interface (IEEE 802.3) for 10 Base-T or 100 Base-T connections
DHCP Client
QoS Support: IP TOS, DiffServ
VoIP Network Specifications
H.323 v.3 Gateway and Integrated Gatekeeper
SIP User Agent
SIP Back-to-back User Agent (B2BUA)**
SIP RFC2833 In-band DTMF signaling
SIP Refer Method Support
IVR/RADIUS server support for AAA with integrated multilingual IVR
Adaptive Voice Activity Detection (VAD) with Comfort Noise Generation (CNG)
Adaptive Jitter Buffer
Packet Loss Compensation
NATAccess�
Security: IP Filtering
Up to 48 simultaneous VoIP calls
Configuration/Management
Quintum Tenor Configuration Manager (GUI) for configuration of remote individual Tenors
Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring and CDR monitoring
SNMPv2 Agent
Command Line Interface
Dimensions (1U High Chassis)
W 17 3/8" x H 1 3/4" x D 10 3/4"
W 44.5cm x H 4.5cm x D 27.6cm
Maximum weight: 10 lbs. (4.55kg)
AC Power: 100-240 Volts AC, 50/60 Hz, 60 watts
Operating temperature: 40� - 104� F (5� - 40� C)
Operating humidity: 20% - 80% non-condensing
Telco: FCC Part 68, TS-016, TBR4, TS-038, CS03
EMC: FCC Part 15 EN55022, EN55024, EN61000-2-3, EN61000-3-3, AS/NZS3260
Safety: UL60950, EN60950, AS/NZS60950
|
