Quintum Tenor AXM2400 24 Port FXS/FXO VoIP Multipath Switch with 24 VoIP Channels.

The Quintum Tenor AX Series gives businesses with analog voice infrastructures an easy, cost-effective way to capitalize on the power of Voice over IP (VoIP).

The Tenor integrates a gateway, a gatekeeper, and intelligent call routing, and supports QoS all in one solution. With its MultiPath architecture, the Tenor connects to the data network through a 10/100 Ethernet interface, the voice network through either a PBX or phone, and the public switched telephone network.

CALL MANAGEMENT FEATURES Automatic call type detection: Voice/Modem/Fax Answer and Disconnect Supervision Trunk group support Public and private dial plan support User programmable dial plan support Forced IP routing and IP port mapping Pass-through support for calls to Toll-Free, local and special service numbers (i.e., emergency services, etc.) Automatic appending and stripping of digits to dialed numbers Call Detail Records Least cost routing with external Quintum VoIP Call Routing Server* Type I Caller ID Name support (Telcordia, ETSI, NTT and DTMF) TECHNICAL SPECIFICATIONS Voice algorithms: G.723.1a, G.729ab, G.711 Auto codec negotiation Fax support: Industry standard T.38 and Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps Modem over IP Choice of 8, 16, or 24 FXS and/or FXO configurations or a 48 FXO only configuration Standard 50 pin RJ-21 Telco connectors Coding: A-law, ?-law Enhanced (Carrier Grade) Echo Cancellation: ITU Rec. G168, up to 128 msec tailsize Loop Start, Reverse Battery, Battery Disconnect Tandem/TDM switching Maximum Call Rate: 1,800 calls/hour IP Network Specifications LAN Interface: 1 Fast Ethernet port (10/100 Base-T) Standard RJ-45 Interface (IEEE 802.3) for 10 Base-T or 100 Base-T connections DHCP Client QoS Support: IP TOS, DiffServ VoIP Network Specifications H.323 v.3 Gateway and Integrated Gatekeeper SIP User Agent SIP Back-to-back User Agent (B2BUA)** SIP RFC2833 In-band DTMF signaling SIP Refer Method Support IVR/RADIUS server support for AAA with integrated multilingual IVR Adaptive Voice Activity Detection (VAD) with Comfort Noise Generation (CNG) Adaptive Jitter Buffer Packet Loss Compensation NATAccess� Security: IP Filtering Up to 48 simultaneous VoIP calls Configuration/Management Quintum Tenor Configuration Manager (GUI) for configuration of remote individual Tenors Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring and CDR monitoring SNMPv2 Agent Command Line Interface Dimensions (1U High Chassis) W 17 3/8" x H 1 3/4" x D 10 3/4" W 44.5cm x H 4.5cm x D 27.6cm Maximum weight: 10 lbs. (4.55kg) AC Power: 100-240 Volts AC, 50/60 Hz, 60 watts Operating temperature: 40� - 104� F (5� - 40� C) Operating humidity: 20% - 80% non-condensing Telco: FCC Part 68, TS-016, TBR4, TS-038, CS03 EMC: FCC Part 15 EN55022, EN55024, EN61000-2-3, EN61000-3-3, AS/NZS3260 Safety: UL60950, EN60950, AS/NZS60950