You are here: Home > Asterisk Cards > OpenVox Cards > OpenVox Failover Appliances

OpenVox Failover Appliances

Buy OpenVox Failover Appliances at VoIP DW the online leading reseller of OpenVox Failover Appliances. OpenVox Failover Appliances ship the same day at VoIP DW.
Sort By:
Page of 1
OpenVox FA40 4 Port IP-PBX Analog Failover Box OpenVox FB40 4 Port IP-PBX ISDN BRI Failover Box OpenVox FD40 4 Port IP-PBX T1 Failover Box
Price: $380.97
Price: $475.97
Price: $475.97
OpenVox FA40 OpenVox FB40 OpenVox FD40

OpenVox FA40 4 Port IP-PBX Analog Failover Box

The OpenVox FA40 is a 4-port analog interface failover box. It can better protect the unpredictable problems happen to the Asterisk PBX. It will provide an effective way to backup the Asterisk PBX when undesirable changes are detected (often when Asterisk fails or power-off of the system). FA40 provides a reliable and flexible solution to Asterisk PBX.

The OpenVox FA40 is controlled through an Asterisk loadable module res_failover.so. This module keeps sending ́runningî signal to FA40 when Asterisk is running. Once Asterisk is down or system power is cut off, the module will not be able to send out the ́runningî signal to FA40 and thus FA40 will automatically switch to the standby telephone.

OpenVox FA40 4 Port IP-PBX Analog Failover Box Features;

  • Easy installation; uses USB to connect computer or server.
  • Industry standard USB type B connector.
  • USB 2.0 and 1.1 compliant.
  • Low power consumption, takes power from USB bus.
  • Standard length type A to type B cable provided.
  • Supports hardware watchdog.
  • Supports up to 4 standby telephones.
  • Supports multiple FA40 devices in one system.
  • Fully supports Asterisk (Version1.2/1.4/1.6).
  • Small plastic enclosure: 285mm x 110mm x 34mm
  • 4 power supply indicator lights.
  • Rohs compliant.

OpenVox FB40 4 Port IP-PBX ISDN BRI Failover Box

The OpenVox FB40 is a 4-port ISDN BRI interface failover box. It can better protect the unpredictable problems happen to the Asterisk PBX. It will provide an effective way to backup the Asterisk PBX when undesirable changes are detected (often when Asterisk fails or power-off of the system). FB40 provides a reliable and flexible solution to Asterisk PBX.

The OpenVox FB40 is controlled through an Asterisk loadable module res_failover.so. This module keeps sending ́runningî signal to FB40 when Asterisk is running. Once Asterisk is down or system power is cut off, the module will not be able to send out the ́runningî signal to FB40 and thus FB40 will automatically switch to the standby server.

OpenVox FB40 4 Port IP-PBX ISDN BRI Failover Box Features:

  • Easy installation; uses USB to connect computer or server.
  • Industry standard USB type B connector.
  • USB 2.0 and 1.1 compliant.
  • Low power consumption, takes power from USB bus.
  • Standard length type A to type B cable provided.
  • Supports hardware watchdog.
  • Supports up to 4 ISDN BRI interfaces.
  • Supports multiple FB40 devices in one system.
  • Fully supports Asterisk (Version1.2/1.4/1.6).
  • Small plastic enclosure: 285mm x 110mm x 34mm
  • 4 power supply indicator lights.
  • Rohs Compliant

OpenVox FD40 4 Port IP-PBX T1 Failover Box

The OpenVox FD40 is a 4-port PRI interface failover box. It can better protect the unpredictable problems happen to the Asterisk PBX. It will provide an effective way to backup the Asterisk PBX when undesirable changes are detected (often when Asterisk fails or power-off of the system). FD40 provides a reliable and flexible solution to Asterisk PBX.

The OpenVox FD40 is controlled through an Asterisk loadable module res_failover.so. This module keeps sending ́runningî signal to FD40 when Asterisk is running. Once Asterisk is down or system power is cut off, the module will not be able to send out the ́runningî signal to FD40 and thus FD40 will automatically switch to the standby server.

OpenVox FD40 4 Port IP-PBX T1 Failover Box Features:

  • Easy installation; uses USB to connect computer or server.
  • Industry standard USB type B connector.
  • USB 2.0 and 1.1 compliant.
  • Low power consumption, takes power from USB bus.
  • Standard length type A to type B cable provided.
  • Supports hardware watchdog.
  • Supports up to 4 PRI interfaces.
  • Supports multiple FD40 devices in one system.
  • Fully supports Asterisk (Version1.2/1.4/1.6).
  • Small plastic enclosure: 285mm x 110mm x 34mm
  • 4 power supply indicator lights.
  • Rohs Compliant