OpenVox Accessories

OpenVox ACC1002 PCIe Riser Card

The OpenVox ACC1002 PCIe Raiser Card helps save valuable space within a mini or micro form factor computer case (1u or 2u chassis supported), as well as low profile rack mountable servers. By allowing full-sized PCIe cards to be installed on a right angle (Parallel with motherboard), situating them parallel to the motherboard. This ensures the height of the PCIe card is suitable for small form factor cases.

OpenVox SP141 RJ45 to RJ11 Splitter for A800P Cards (2 Pieces Per Set)

SP141 is designed for analog card A800P. It's to split RJ45 jack to RJ11 jack that is used to connect the telephone line.

OpenVox RJ45 to RJ45 Splitter for B800P (4 Pieces Per Set)

The OpenVox SP124 is a splitter that is specially designed for B800P.

OpenVox ACC0001 T1 Card Timing Cable

The OpenVox timing cable ACC0001 is a standard two pin jumper cable. It allows Analog cards and T1/E1 cards to share the same sync (timing) source from the T1/E1 line provider,?or?provide a consistent sync source across multiple cards. This is a useful feature for data and fax modes and some voice applications to prevent corruption due to timing slips on multiple cards in the same system. And thus the timing cable enables OpenVox users to experience superior quality fax service.

OpenVox SP140 RJ45 to RJ11 Splitter for A1200P Cards (3 Pieces Per Set)

SP140 is designed for analog card A1200P. It's to split RJ45 jack to RJ11 jack that is used to connect the telephone line.

OpenVox SP142 Splitter (Pack of 6)

SP142 is designed for analog card A2410P/AE2410P. It's to split RJ45 jack to RJ11 jack that is used to connect the telephone line or telephone.

OpenVox FXO100 (1 FXO Port Module)

The OpenVox FXO-100 module allows A-400 PCI card to terminate analog telephone lines (POTS). Because of the modular design, user can activate additional ports at any time with more FXO-100 or FXS-100 daughter cards. The FXO-100 module passes all the call features that any standard analog telephone line will support.

The OpenVox FXO-100 is Pin to Pin compatible with Digium X100M daughter card. User can use this module directly on TDM400P card.

OpenVox FXS100 (1 FXS Port Module)

The OpenVox FXS-100 module allows A-400 PCI card to terminate analog telephones. Because of the modular design, user can activate additional ports at any time with more FXS-100 or FXO-100 daughter cards. The FXS-100 module passes all the call features that any standard analog telephone will support.

The OpenVox FXS-100 is Pin to Pin compatible with Digium S100M daughter card. User can use this module directly on TDM400P card.

OpenVox FXO400 Quad-FXO Module (4 FXO Port Module)

The FXO400 Quad-FXO module allows OpenVox Analog A2410P/AE2410P series cards to terminate four analog telephone lines (POTS) per module. Because of the modular design, users can activate additional ports at any time with more FXS400 or FXO400 modules. The FXO400 module passes all the call features any standard analog telephone line will support.

OpenVox FXS400 Quad-FXS Module (4 FXS Port Module)

The FXS400 Quad-FXS module allows OpenVox Analog A2410P/AE2410P series cards to terminate four analog telephones per module. Because of the modular design, users can activate additional ports at any time with more FXS400 or FXO400 modules. The FXO400 module passes all the call features any standard analog telephone line will support.

OpenVox EC2032 Echo Cancellation Module

Once the Octasic® DSP module EC2032 is added to the A2410P, please make sure you are ready to say goodbye to the poor voice quality and echo echo echo in your phone system. No one will even get a chance to hear that any more! The A2410P with Octasic DSP module will support Telco-grade hardware echo cancellation on all channels, up to the card’s maximum configuration in 24 ports with no additional CPU load.

The OpenVox EC2032 is already bundled with the AE2410P series analog cards.