The Linksys 5 Volt Power Over Ethernet (POES5) Splitter lets you put your Linksys IP Phones almost anywhere, by removing the requirement of nearby power outlets. The POES5 sends power and VoIP over one Category 5 cable to your Linksys IP Phone. When it's time to add or relocate a phone, the POES5 can simplify your installation. The POES5 provides an 802.3af PoE port for connection back to a PoE switch. The compact POES5 connects to the standard DC power input and RJ45 Ethernet port on the Linksys IP Phone (or other supported Linksys VoIP product) via two "split" cables. The POES5 can be then tucked away and concealed in the stand attached to the Linksys IP phone. Simplify your installation and place your Linksys IP Phones, or any of the other supported Linksys VoIP products in a preferred spot with the Linksys 5 Volt Power Over Ethernet (POES5) Splitter.

Product Description	Linksys Power Over Ethernet Splitter 5V POES5 - PoE splitter
Device Type	PoE splitter
Form Factor	External
Dimensions (WxDxH)	3.1 in x 2.2 in x 0.9 in
Weight	1.7 lbs
Output Voltage	5 V
Output connector(s)	Power DC jack

General
Device Type	PoE splitter
Form Factor	External
Width	3.1 in
Depth	2.2 in
Height	0.9 in
Weight	1.7 lbs
Power Device
Input Voltage Range	DC 36 - 57 V
Input Connector(s)	RJ-45
Output Voltage	5 V
Output connector(s)	Power DC jack
Expansion / Connectivity
Interfaces	1 x network - Ethernet - RJ-45
Environmental Parameters
Min Operating Temperature	32 °F
Max Operating Temperature	113 °F
Humidity Range Operating	10 - 85%