CyberData 011114 - VoIP V2 Loudspeaker Amplifier Singlewire-Enabled PoE
Note: Does not require AC power to the amplifier if on PoE network. CyberData Loudspeaker must be purchased separately.
The CyberData 011114 SIP-enabled VoIP V2 Loudspeaker Amplifier is for use with Singlewire's paging and emergency notification software InformaCast® or InformaCast CK. This PoE-powered device hooks up easily to new and existing Singlewire installations.
With up to 25 watts of driving power (802.3at), the CyberData 011114 Amplifier provides direct drive of a standard horn speaker and supports a line out connector for connection to an external amplifier. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the Paging Amplifier can be configured to listen to multicast address and port number combinations to form paging zones.
This new version of the popular CyberData Loudspeaker Amplifier, which includes the NEMA enclosure (NEMA Type 3R / IP42), can be used in some outdoor environments, and is perfect for noisy and industrial environments such as warehouses and machine shops.
CyberData 011114 VoIP Loudspeaker Amplifier Features:
- InformaCast®
- Dual-speed ethernet 10/100 Mbps
- Weather-resistant NEMA enclosure
- Web-based configuration
- PoE 802.3at and 802.3af-enabled
- Line-out connector
- Direct 8 Ohm speaker drive
- User-uploadable tones and messages
- Digital and manual volume control
CyberData 011114 VoIP Loudspeaker Amplifier Package Contents:
- Loudspeaker amplifier assembly
- Enclosure
- Installation quick reference guide
- Loudspeaker amplifier mounting accessory kit, RoHS (part number 071057A) which includes: (3) plastic ribbed anchors and (3) #6 sheet metal screws
