CyberData 011097 - VoIP V2 Loudspeaker Amplifier PoE
Note: Does not require AC power to the amplifier if on PoE network. Loudspeaker must be purchased separately.
The new CyberData V2 SIP-enabled VoIP Loudspeaker Amplifier, CyberData part number: 011097, provides an easy method for implementing an IP-based overhead paging system for both new and legacy installations.
With up to 25 watts of driving power (802.3at), the CyberData 011097 VoIP V2 Loudspeaker Amplifier provides direct drive of a standard horn speaker and supports a line-out connector for connection to an external amplifier. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the Loudspeaker Amplifier can be configured to listen to multicast address and port number combinations to form paging zones.
The CyberData 011097 VoIP V2 Loudspeaker Amplifier can be configured as a Night Ringer with two SIP extensions. One extension can be assigned to a page group for auto answer paging. The second extension can be assigned to a “First-to-Answer” Night Ring group with IP phones. An audio ring file is activated when the second SIP extension of the loudspeaker amplifier is dialed. If any of the IP phones in the ring group is answered (or if the caller hangs up), the loudspeaker amplifier stops ringing.
CyberData 011097 VoIP V2 Loudspeaker Amplifier Features:
- SIP (RFC 3261) compatible
- Dual-speed ethernet 10/100 Mbps
- Web-based configuration
- Web-based firmware upgradeable
- PoE 802.3at and 802.3af-enabled
- IGMP
- Line-out connector
- DTMF controlled relay with open sense
- Direct speaker drive
- User-uploadable tones
- Simultaneous SIP and Multicast
- Weather-resistant NEMA enclosure
- Autoprovisioning
- Nightringer
